- #Wanscam ip camera tool update
- #Wanscam ip camera tool password
How to find an IP address of my camera? Connect via the native application first and obtain the address either from this application or from your Wi-Fi router. memory_dumper.sh - dumps memory of an active process.flashwriterFlash - flash writer was taken from the custom firmware from 4PDA.backup_mtd.sh - backs up the firmware into the current directory.wanscam_wifi_config - generates a Wi-Fi configuration file used by the K21 firmware.swap_bytes - converts a firmware image to be flashable via a CH341A programmer.Tools are either pre-compiled, when taking from other sources or written in shell or Go ( ).
There are some prevention techniques used, but still the update might destroy everything.Ĭheck custom_firmware/readme.md for more details. IMPORTANT: never use the update mechanism in this mode as it will destroy your firmware. The difference here is only allowing to run it in a chroot environment on INQMEGA IL-HIP291 without needing to flash it. Many thanks go to PauS and slydiman from who built this firmware. installer.sh can do it, currently there is no need to use it. data/pre_init.sh, see /home/run_init.sh in K21 firmware. If you need to run these scripts earlier, it is possible to use this entry-point: For example, it is not possible to pre-load drivers. Though Wanscam K21 uses zskj_script_run.sh as an entry point, which is executed by the camera application itself ( ipc) and has some limits. INQMEGA uses debug_cmd.sh as an entry point, which is executed before the main application and allows to customize everything. mod/logs/ to analyze boot logs and search for errorsĭifferent firmwares offer different entry points to hook into to run these scripts.
The new password will be saved on the SD card Mount the whole directory containing passwd, group and shadow files via -bind on /etc: mount -bind PATH_TO_PASSWD_DIR /etc/, change the password and unmount.
passwd will not allow to change password, because it cannot create a file on a read-only /etc/. It is better to configure your camera through the app first in order to make sure there is a network connectivity. Should also work on similar compatible cameras. the original IL-HIP291 does not save videos if cannot access its serversĮdit mod/config.txt to activate/deactivate modules or other settings. openrtsp is a pre-compiled tool to capture live streams. inqmega_patches copies devParam.dat from SD to /home/. fake_hw_clock saves the current time into a file on SD, recovers the time on reboot. ash_history and authorized_keys are editable SSH is preferred over telnet (dropbear can be easily activated). Dependencies between modules are checked. Two entry points per module: boot and run. Easy configuration through config.txt files. Just copy everything and point to another DEST/main.sh, everything else should be detected automatically You may copy and rename mod/ directory to test multiple versions at the same time. These scripts offer customization of firmwares for GOKE GK7102/GK7102S based web-cameras. The main difference is modularity and flexibility allowing to select needed functionalities one by one. In this repository you can find a bit reworked scripts acquired from zsgx1hacks and 4PDA (in Russian). Make sure you understand what you are doing. It would be the perfect camera for me if only it worked with my beloved Synology installation, but anyone else should be happy with it.Read-only modular GOKE GK7102/GK7102S camera customizerĭisclaimer: you have a high risk of bricking your camera. The face tracking is a funny gadget, which can be disabled one the novelty effect has passed. Overall, it is a good quality FHD camera with Ethernet connector, embedded HTML interface and mobile companion, both excellent. The K21 can be found below 30€ at Bangood or Gearbest I'm not sure how the others manage around that, but they all do just fine.Īt least there's a way to capture the video stream directly wiht the rtps url: Somehow, Synology seems to be the only one relying entirely on the default URI () to obtain the configuration, and with the K21, this URI does not return any data. Onvif Device Manager, IP Camera Viewer, Onvifer, Anycam.IO or HappyTime all detect the camera straight away. The only one that failed is, of course, the one I use Synology Surveillance Station. In fact, all the 3rd party programs I have tried detected the camera as an ONVIF compliant device. However I fail to see any improvement in Down/Up and Right/Left panning controls inverted and the Onvif compatility. ONVIF works, except with Synology (and I think its their fault)
0 kommentar(er)
